NcPCI-EXT64

NcPCI-EXT64

The NCPCI-EXT64 is a passive 64-bit CompactPCI extender board, i.e. it does not contain any circuitry but two CompactPCI connector sets. One is used to plug into the backplane of the chassis and the second is dedicated to receive the board under test.

The NCPCI-EXT64 provides several male header connectors carrying all PCI bus signals, I/O signals, and H.110 specific signals routed between the two sets of CompactPCI connectors for access by measuring equipment, i.e. they do directly fit the probes of a Tektronix TLA logic analyzer.

The signals on these male header connectors are grouped by eight. One row of these double-row header connectors carries the signals, the other is grounded.

The board also provides several LEDS and test points for the power supply lines and ground.

All power supply lines may be disrupted by opening wire bridges for current measurements.


 

arrow
Key features
arrow
Technical details
arrow
Documentation
arrow
Block diagram
arrow
Order code
Relating the key features of the NcPCI-EXT64 please consider the product description above!
CompactPCI Interface
  • 33/66MHz, 64-bit


Power Consumption

  • Current drawn from +3.3V, +5V, +12V, -12V,V(I/O) : less than 10mA each.
  • +3.3V, +5V, V(I/O), and GND connected to separate power planes.
  • All power supply lines drive signalling LEDs. All power supply lines may be cut by opening wire bridges for current measurements.
   Environmental
  • -40ºC to +85ºC (operating and storage)
  • Relative Humidity: 5% to 90% (non-condensing)


Standard Compliance

  • PCI Rev. 2.2
  • PICMG2.1 R2.0



Title
Description
Format
Size
Rev #
Date Last Modified
NCPCI-EXT64_datasheet NCPCI-EXT64 Data Sheet pdf 176 KB 1.0 29-10-2003
NCPCI-EXT64_manual NCPCI-PMC User's Manual pdf 1103 KB 1.1 12-11-2010


NCPCI-EXT64 block diagram


Product Code: NcPCI-EXT64

Option
Description
Comment
- non-intelligent 64bit 6U cPCI extender -