N.A.T. presents NATIVE Series of MicroTCA chassis

MTCA Racks / Chassis

<

	NATIVE Chassis
	NATIVE-SX The NATIVE-SX uTCA chassis from N.A.T.'s Technology Enabler line of products is a low cost, simple uTCA chassis dedicated to smaller communication and automation applications. It is also well suited for development purposes. The NATIVE-SX chassis provides 5 slots for Advanced Mezzanine Cards (AMCs) plus one full size MCH slot in a 3U desktop form factor. The NATIVE-SX provides a non-redundant environment including support of PCI-Express (PCIe) or other fat pipe communication protocols and SATA. size − 197 x 134mm table top − depth: 252mm slots − 2 full- and 3 mid-size AMCs − 1 MCH with fat pipe support power supply − 110-240VAC, 300W output, front pluggable cooling unit − single fan (integrated) backplane configuration − direct SATA / SAS connections − single star base fabric and fat pipe, PICMG compliant
	NATIVE-C1 The NATIVE-C1 offers the performance benefit of MicroTCA in a space-saving horizontal-mounted 1U height. Six AdvancedMC (AMC) slots offer users the flexibility to configure for a wide range of applications, enterprise, industrial control, telecom, wireless, and others. Its unique card guide design eases the insertion/removal of AMC cards. The replaceable backplane improves the serviceability of the system. NATIVE-C1 equips with higher performance cooling unit – over 100 CFM of airflow though the chassis – for better thermal profile. size − 1u 19" rack-mounted slots − 6 mid-size AMCs, horizontally-mounted − 1 MCH with fat pipe support power supply − 110-240VAC, 300W or 600W or 900W output, front pluggable, or − -48VDC, 380 or 760W output, front pluggable cooling unit − 2 redundant hot-swap fan trays for AMCs backplane configuration − direct SATA / SAS connections − single star base fabric and fat pipe, PICMG compliant
	NATIVE-C2 NATIVE-C2 is a 2U MicroTCA chassis which offers system designers the most performance per U in a fully redundant configuration. Twelve AdvancedMC (AMC) slots give users the flexibility to configure for a wide range of applications, enterprise, industrial control, telecom, wireless, and others. NATIVE-C2's unique card guide design eases the insertion/removal of AMC cards. The replaceable, redundant fabric backplane improves the serviceability of the system. MicroBoxPlus equips with higher performance cooling unit – over 200 CFM of airflow though the chassis – for better thermal profile. size − 2u 19" rack-mounted slots − 12 mid-size AMCs, horizontally-mounted − 2 MCH with fat pipe support power supply − 2 power modules − 110-240VAC, 300W or 600W or 900W output, front pluggable, or − -48VDC, 380 or 760W output, front pluggable cooling unit − 2 redundant hot-swap fan trays for AMCs backplane configuration − direct SATA / SAS connections − dual star base fabric and fat pipe, either SCOPE or PICMG compliant
	NATIVE-R5 The primary intention of NATIVE-R5 is to prove the concept of the Rear Transition Modules (RTM) for a MicroTCA chassis which was developed in the PICMG Physics WG1. The NATIVE-R5 provides full IPMI management capabilities so is it perfectly suited to test all management aspects of AMC and RTMs. The chassis provides speed controlled fans for low acoustic noise in a laboratory environment. The fan speed can be set manually by entering commands on the MCH console. size − 5u 42HP table top − depth: 373.3 mm slots − 6 double mid-size AMCs − 1 MCH with fat pipe support − 6 RTM slots according MTCA.4* power supply − 110-240VAC, 300W output, front pluggable cooling unit − 4 fans for AMCs (integrated) − 2 fans for RTMs (integrated) backplane configuration − direct SATA / SAS connections − single star base fabric and fat pipe, PICMG compliant − p2p connections at AMC ports 12-15 according to MTCA.4* − trigger, clock and interlock signals for physics
	NATIVE-R9 NATIVE-R9 is designed for high availability physics applications where redundancy of all chassis modules is required. NATIVE-R9 offers two push-pull fan trays which are removable from the front of the chassis. Cable trays at the front and rear of the chassis facilitate management of cables. The chassis accepts up to four MTCA.0 compliant Power Modules. size − 9u 19" rack-mounted − depth: 373.3 mm slots − 12 single/double width mid-size AMCs − 2 MCH with fat pipe support − 12 RTM slots according MTCA.4* power supply − 4 power modules − 110-240VAC, 300W or 600W or 900W output, front pluggable, or − -48VDC, 380 or 760W output, front pluggable cooling unit − 2 redundant hot-swap fan trays for AMCs and RTMs backplane configuration − direct SATA / SAS connections − dual star base fabric and fat pipe, PICMG compliant − p2p connections at AMC ports 12-15 according to MTCA.4* − trigger, clock and interlock signals for physics
	NATIVE-IPC NATIVE-IPC is a uTCA platform with customizable front panel and a cooling unit with 3 radial fans. The air filter can be replaced from the rear without tools. size − 4u 19" rack-mounted − depth: 300 mm slots − 12 single width mid-size AMCs − 2 MCH with fat pipe support power supply − 2 removable power modules (12 HP) − 110-240VAC, 300W or 600W output, rear pluggable, or − -48VDC, 380 or 760W output, rear pluggable cooling unit − 3 radial fans (air flow direction: front to back) backplane configuration − dual star base fabric and fat pipe, PICMG compliant − RJ45-Connector

*refers to PICMG Physics WG1, draft version of MTCA.4. N.A.T. is NOT declaring compliance to this draft.

Documentation:

Title	Description	Format	Size K	Rev #	Date Last Modified
NATIVE-SX	NATIVE SX Operating manual	pdf
NATIVE-R5	NATIVE-R5 datasheet	pdf
NATIVE-R9	NATIVE-R9 datasheet	pdf
NATIVE-C1	NATIVE-C1 datasheet	pdf
NATIVE-C2	NATIVE-C2 datasheet	pdf

Software:

Order Codes:
Product Code: NATIVE-<options>

Option	Function	Description	Comment
-SX	Low cost MTCA chassis	MTCA, 5 slots compact chassis
-R5	Small xTCA chassis	xTCA 5U, 6 slots chassis
-R9	Large xTCA chassis	xTCA 9U, 12 slots chassis
-C1	Large MTCA chassis	MTCA 1U, 6 slot chassis
-C2	Large MTCA chassis	MTCA 2U, 12 slot chassis
-IPC	Large MTCA chassis	MTCA 4U, 12 slot chassis