Telecom / Infrastructure

NAMC-8569-ATM

Advanced Mezzanine Card (AMC) CPU Board featuring data exchange between optical OC3/STM1 ATM traffic, Ethernet and TDM data

The NAMC-8569-ATM is a multi-service CPU board in Advanced Mezzanine Card™ (AMC) form factor:

Flexibility, high-bandwidth and low latency processing dedicate the NAMC-8569-ATM for applications in telecommunication and defense communication market.

The front Ethernet interface can be switched or multiplexed towards the CPU and the backplane. Depending on the required throughput one Fat Pipe (PCIe or SRIO) or the combination of both Fat Pipes (PCIe and SRIO) are available to the backplane. Thus, the NAMC-8569-ATM is targeting at ATM based applications where IO boards need PCIe and where low latency of SRIO for multiprocessing is requested.

System Processor and Memory
• Up to 1,3 GHz Freescale Power QUICCIII MPC8569
• 128-1024 MB DDR2 SDRAM
• 16-128 MB FLASH
• Micro-SD-Card slot
• 512 kB MRAM
• 2 GB NAND Flash

ATM Interworking Support
• Interworking capabilities I-TDM/TDM or Ethernet and ATM
• IP over ATM Routing & Forwarding
• ATM AAL0, AAL1, AAL2, AAL5

Front Panel Interfaces
• 1 x GbE

Backplane Connectivity
Base Fabric
• 2x 1GbE at AMC port 0 and 1

Fat Pipe Interface Options
• PCIe x4 on ports 4-7 or 8-11
• PCIe x1 on port 4 or 8
• SRIO x4 on ports 4-7 or 8-11
• SRIO x1 on ports 4 and 8
• PCIe x1 on port 4 and SRIO x1 on port 8

I-TDM Interface
• 1024 bidirect. 64 kbit/s channels
• 125 μs-mode and 1ms-mode support TDM

TDM (optional)
• H.110 alike 32MHz clocked TDM interface connects to ports 12, 13 (data) and port 14 (sync)

Indicator LED's
• 2 LEDs for various link indications
• 1 fault indication LED controlled by the IPMI controller
• 1 general purpose LED controlled by the FPGA/CPU

Operating System Support
• OK-1, QNX, LINUX

Power Consumption
• 12 V, 2A max.

Environmental Conditions
• Operating temp.: 0°C to +55°C with forced cooling
• Storage temp.: -40°C to +85°C
• Relative humidity: 10% to 90% rh noncondensing

Standard Compliance
• PICMG AMC.0 Rev. 2.0
• PICMG AMC.1 Rev. 1.0
• PICMG AMC.2 Rev. 1.0 (Type E2)
• PCIe Base Spec. Rev. 1.1
• PICMG SFP.0 Rev. 1.0
• PICMG SFP.1 Rev. 1.0
• IPMI Specification v2.0 Rev. 1.0
• PICMG μTCA.0 Rev. 1.0