amcTelecom

Telecom / Infrastructure

Select Document

NAMC-8569-CPU

 

Advanced Mezzanine Card (AMC) CPU Board with PCIe, SRIO, GbE, USB, RS232 and ITDM

The NAMC-8569-CPU is a multi-service CPU board in Advanced Mezzanine Card (AMC) form factor:

  • Latest Freescale™ PowerQUICC® III MPC8569 processor:
  • dual Multichannel Communication Controller (MCC)
  • higher core frequency than predecessor PowerQUICC III processors
  • DDR2 SDRAM 1GB, NAND-Flash 2 GB

  • Lattice FPGA
  • up to 70.000 logic cells
  • Interfaces at front panel
  • 2x Gigabit Ethernet (GbE)
  • USB port and RS232
  • optional user defined IO via sub module
  • optional TDM connectivity
  • Backplane connections
  • 2x Gigabit Ethernet (GbE)
  • Serial Rapid IO (SRIO)
  • PCI Express (PCIe)
  • TDM and I-TDM
  • 125 μs and 1 ms I-TDM modes as well as TDM cross-connect supported
  • customizeable I/O mezzanines
  • Flexibility, high-bandwidth and low latency processing dedicate the NAMC-8569-CPU for applications in (tele-)communication, medical, industrial automation, defense & aerospace and telecommunication market.

    One or both GbE interfaces can be switched or multi-plexed towards the CPU and the backplane. Depending on the required throughput one Fat Pipe (PCIe or SRIO) or the combination of both Fat Pipes (PCIe and SRIO) is available to the backplane. Thus, the NAMC-8569-CPU is targeting at applications where IO boards need PCIe and where low latency of SRIO for multiprocessing is requested.

    NAMC-8596-CPU

     

    System Processor and Memory
    • Up to 1,3GHz Freescale Power QUICCIII MPC8569
    • 128-1024 MB DDR2 SDRAM
    • 16-128 MB FLASH
    • Micro-SD-Card slot
    • 512 kB MRAM
    • 2GB NAND Flash

    Front Panel Interfaces
    • USB, RS232, 2 x GbE

    Backplane Connectivity
    Fat Pipe Interface Options
    • PCIe x4 on ports 4-7 or 8-11
    • PCIe x1 on port 4 or 8
    • SRIO x4 on ports 4-7 or 8-11; speed 1.25 Gb/s or 2.5 Gb/s or 3.125 Gb/s per lane
    • SRIO x1 on ports 4 and port 8; speed 1.25 Gb/s or 2.5 Gb/s or 3.125 Gb/s
    • PCIe x1 on port 4 and SRIO x1 on port 8; speed 2.5 Gb/s

    I-TDM Interface
    • 1024 bidirect. 64 kbit/s channels
    • 125 μs-mode and 1ms-mode support TDM (optional)
    • H.110 alike 32MHz clocked TDM interface connects to ports 12, 13 (data) and port 14 (sync)

    Networking
    • 2 x 1 GbE at AMC port 0 and 1
    • 2 x 1000/100/10 Base T at front panel

    Indicator LED's
    • Various link indications by 4 LED's at RJ45 connector
    • 1 fault indication LED controlled by the IPMI controller
    • 1 general purpose LED controlled by the FPGA/CPU

    Operating System Support
    • OK-1, QNX, LINUX

    Power Consumption
    • 12 V, 2A max.

    Environmental Conditions
    • Operating temp.: 0°C to +55°C with forced cooling
    • Storage temp.: -40°C to +85°C
    • Relative humidity: 10% to 90% rh noncondensing

    Standard Compliance
    • PICMG AMC.0 Rev. 2.0
    • PICMG AMC.1 Rev. 1.0
    • PICMG AMC.2 Rev. 1.0 (Type E2)
    • PCIe Base Spec. Rev. 1.1
    • PICMG SFP.0 Rev. 1.0
    • PICMG SFP.1 Rev. 1.0
    • IPMI Specification v2.0 Rev. 1.0
    • PICMG μTCA.0 Rev. 1.0

         
    Documentation:
    Title
    Description Format Size K Rev # Date Last Modified
    NAMC-8569-CPU_datasheet.pdf Data Sheet pdf 418K
    1.0
    19-04-2011
    NAMC-8569-CPU_man_v10.pdf User's Manual pdf 491K
    1.0
    19-04-2011

     

    Software:
    Title
    Description Rev # Date Last Modified
    NBSP-QNX-NAMC-8569 QNX BSP for NAMC-8569-CPU in source form 1.0 19-04-2011
    NBSP-LINUX-NAMC-8569 LINUX BSP for NAMC-8569-CPU in source form 1.0 19-04-2011

     

    Order Codes:
    Product Code: NAMC-8569-CPU
    Option
    Description Comment
    NAMC-8569-CPU MPC8569 PowerQUICC III (1.3 GHz), 1 GB DDR2 SDRAM, 2 GB NAND Flash, 128 MB NOR Flash, front I/O (2 GbE, RS232, USB, MicroSD slot), rear I/O (SRIO x4 or PCIe x4 or (SRIO x1 and PCIe x1), IPMI, trigger signals) Other processor options on request

    Documentation Software Order Codes