MTCA Racks / Chassis

NATIVE Series

NATIVE-SX

The NATIVE-SX uTCA chassis from N.A.T.'s Technology Enabler line of products is a low cost, simple uTCA chassis dedicated to smaller communication and automation applications. It is also well suited for development purposes.
The NATIVE-SX chassis provides 5 slots for Advanced Mezzanine Cards (AMCs) plus one full size MCH slot in a 3U desktop form factor.
The NATIVE-SX provides a non-redundant environment including support of PCI-Express (PCIe) or other fat pipe communication protocols and SATA.

• 5 AMC Slots
• 1 MCH Slot
• Connectivity: Fabric A + Fabric D-G, Fabric B (SATA)
• Power Supply: 300W / 100-240AC
• Power Management Module
• Cooling Unit with IPMI support
• Chassis Manufacturer: Elma

NATIVE-M

The NATIVE-M uTCA chassis from N.A.T.'s Technology Enabler line of products is dedicated to mid range communication applications.
The NATIVE-M chassis provides 12 slots in total for a combination out of 9 full size and 6 compact size Advanced Mezzanine Cards (AMCs) in a 19" 2U rack mountable form factor.
The NATIVE-M provides a non-redundant environment including support of PCI-Express (PCIe) and SATA.

• 12 AMC Slots
• 1 MCH Slot
• Connectivity: Fabric A + Fabric D-G ,
  Fabric B (SATA) Link between Slots 1-2 and 2-8
• Power Supply: 450W / 100-240VAC
• Power Management Module
• 2 managed Cooling Units
• Chassis Manufacturer: Rittal
  

NATIVE-L

The NATIVE-L μ TCA chassis from N.A.T.’s Technology Enabler line of products is dedicated to larger communication applications.

The NATIVE-L chassis provides 12 slots for 8 full size and 4 compact size Advanced Mezzanine Cards (AMCs) in a 19” 5U rack mountable form factor.

Because the NATIVE-L chassis supports two N.A.T. MicroTCA Carrier Hubs (NAT-MCH), two power modules and two cooling units it can be used as NATIVE-L-R in redundant and as NATIVE-L-NR non-redundant environments.

The NATIVE-L-R provides a fully redundant environment usually needed for core communication or high availability solutions.

The NATIVE-L-NR is similar to the NATIVE-L-R except that the clock routing has been changed so that PCI-Express (PCIe) including the 100MHz fabric clock is supported. Of course one can use the NATIVE-L-NR with a second NAT-MCH to support another fabric on ports 8-11 as well as a second power module that supports load sharing.

• 12 AMC Slots
• 2 MCH Slots
• 2 Power Module Slots
• 2 managed Cooling Units
• Connectivity: Fabric A/B, Fabric D-G
• Redundant and non-redundant version available
• Clock Routing Redundant version: redundant CLK1/2 wiring
• Clock Routing Non-Redundant version: FCLK-A wiring (i.e. for PCIe)
• Chassis Manufacturer: Elma
  

NATIVE Starter

NATIVE-STARTER-PLUS is a turn-key uTCA system for evaluation and development, ready-to-run. All components are full compliant to the open standard MicroTCA and AMC.

The system includes a full manageable 6 slot MicroTCA chassis with 5 payload slots and 1 MCH slots, a Dual-core-Intel-CPU, SATA Hard disk and a graphic board.

Bundle Contents:

• Chassis NATIVE-SX with 300 W AC Power supply
• NAT- MCH with GbE and PCIe support
• Pentium Dual Core CPU
• SATA / Graphics AMC Module
• Linux per-installed

NATIVE Starter Plus

NATIVE-STARTER-PLUS is a turn-key uTCA system for evaluation and development, ready-to-run. All components are full compliant to the open standard MicroTCA and AMC.

The system includes a full manageable 6 slot MicroTCA chassis with 5 payload slots and 1 MCH slots, a Dual-core-Intel-CPU, SATA Hard disk and a graphic board. For testing own hardware an AMC extender is included.

Bundle Contents:

• Chassis NATIVE-SX with 300 W AC Power supply
• NAT- MCH with GbE and PCIe support
• Pentium Dual Core CPU
• SATA / Graphics AMC Module
• Linux per-installed
• AMC Extender