  |
Telecommunication |
 |
NPMC-8280-4E1/T1/J1 |
||
| Overview The NPMC-8280-4E1/T1/J1 is a telecommunications interface board in PMC (PCI mezzanine card) form-factor. Based on the Motorola MPC8280 "PowerQuicc II" CPU the NPMC-8280-4E1/T1/J1 is targeted at telecom applications with a need for a powerful and versatile platform, such as applications using SS7, ISDN, ATM, VoP or any combination of these protocols. Hardware The NPMC-8280-4E1/T1/J1 is a P1386.1/Draft 2.0 compatible PMC module that can be plugged onto any VME, cPCI or other carrier board offering a PMC extension slot. Using the on-chip PCI bridge of the MPC8280, the NPMC-8280-4E1/T1/J1 is PCI Rev. 2.2 compatible. The MPC8280 PowerQUICC II processor provides computing resources up to 855 MIPS (450MHz). For less demanding applications the MPC8280 can be replaced by the pin-compatible MPC8265. The four primary rate line interfaces (E1/T1/J1) are driven using Infineon PEB22554 "Quad Falc" framer, and are available on two standard RJ-45 connectors on the front panel. In addition to the four E1/T1 lines the NPMC-8280-4E1/T1/J1 offers a RS232 serial interface on a mini SUB-D connector and a 10/100 Megabit/sec (10/100BaseT) Ethernet interface on a RJ45 connector to be used with a standard CAT5 UTP cable. Thus the NPMC-8280-4E1/T1/J1 is the generic platform for any implementation switching between the classic TDM streams as on E1/T1/J1 and the new generation of packetized data applications running on Ethernet. Moreover, the 100BaseT port can serve as a configuration and management port, i.e. for SNMP. The onboard OKI CT812 H.110 bus controller offers access to the H.110 TDM (Time Division Multiplex) bus and its SC Bus subset on the PMC P14 multi-purpose I/O connector. Equipped with up to 256MB SDRAM and either 16 or 32MB onboard erasable Flash-Memory the NPMC-8280-4E1/T1/J1 is optimized to meet the performance and memory requirements of state-of-the art communication protocols and applications. Firmware Communication protocols like SS7, ISDN, etc., are available as binary firmware images as well as operating system independent source code licenses. By default these firmware protocols run on the well proven N.A.T. real-time kernel OK-1, which is optionally available in source code. Also available for the NPMC-8280-4E1/T1/J1 are BSPs for other operating systems such as VxWorks or Linux. As well as standard protocols N.A.T. offers customized firmware development. Enhanced software development and effective debugging is supported by the onboard BDM/JTAG interface. |
 |
|
| CPU Motorola MPC8280 „PowerQuicc II" at 450 MHz PCI Interface and Compliance MPC8280 on-chip PCI bridge, 32bit /33MHz, PCI Rev. 2.2 H.110 Bus OKI CT812, H.110 on PMC P14 connector DRAM 256MB SDRAM (PC-100, 64 bit) installed in a SODIMM slot Flash PROM 16 or 32MB Flash PROM (32bit) Line Interface four primary rate E1/T1/J1 lines (I.431) on standard RJ45 connectors at front panel supplied by Infineon PEB22554 "QuadFalc" Serial I/O RS232 compatible at front panel Networking 100BaseT Ethernet (IEEE 802.3) on standard RJ45 connector at front panel Indicator LEDs 6 software programmable LEDs and 2 system status indicator LEDs on the front panel Operating System Support and Firmware OK-1, VxWorks, LINUX SS7, ISDN and others Power Consumption 3.3V 0.85A typ. , 5V 0.55A typ. Environmental Temperature (operating): 0ºC to +60ºC with forced air cooling, Temperature (storage): -40ºC to +85ºC Relative Humidity: 10% to 90% at +55ºC (non-condensing) Standard Compliance P1386 and P1386.1/Draft 2.0 |
||
Title |
Description | Format | Size K | Rev # | Date Last Modified |
| NPMC-8280-4E1_man.pdf | NPMC-8280-4E1/T1/J1 technical Reference Manual | 608K | V2.2 | 29-08-2005 | |
| NPMC-8280-4E1_ds.pdf | NPMC-8280-4E1/T1/J1 full data sheet | 336K | V1.0 | 04-21-2005 |
Software:
Title |
Description | Rev # | Date Last Modified |
| NBSP-vxWorks-NPMC-8260-4E1 | vxWorks BSP for NPMC-8280-4E1/T1/J1 in source form, includes basic drivers for the onboard devices, excluding Windriver target license | ||
| NBSP-Linux-NPMC-8280-4E1 | Linux BSB for the NPMC-8280-4E1/t1/J1 in source form | ||
| OK1 V2 | OK1 real time kernel for embedded applications, source or binary distribution, includes drivers for all onboard devices | ||
| NSS7-RTL | SS7 Run Time target license for primary rate communication interfaces, Options: MTP2,MTP3 and ISUP | ||
| NISDN-NET5-RTL | ISDN Primary Rate Run-Time License for E1 interfaces, Switch Type ETSI, API (CAPI or FAPI), per target | ||
| NISDN-PNAM-RTL | ISDN Primary Rate Run-Time License for T1 interfaces, Switch Type NI, 5ESS, DMS-100, API (CAPI or FAPI), per target |
Order Codes:
Product Code: NPMC-8280-4E1/T1/J1
Options: -<CPU>-<Memory>
Option |
Value | Description | Comment |
| CPU | 8280 |
MPC8280 CPU, 450Mhz equipped |
Standard Version |
| Memory | 64,128,256 | onboard SDRAM Memory Size in MByte | 64 MByte = standard Configuration |