NPMC-860-I/O

The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

pmc module npmc-860-io
CPU
Motorola MPC860 „PowerQUICC II" at 50/66/80 MHz

PCI Interface and Compliance
QSPAN II PCI to QBUS bridge (33MHz, 32bit ), PCI Rev. 2.2

SCbus
OKI CT812, SCbus on PMC P14 connector

DRAM
4 or 16 MB 32-bit EDO DRAM

Fast SRAM (opt)
512 KB or 1MB 32-bit SRAM

Flash
2 or 4 MB 8-bit Flash, on-board programmable

I/O
All I/O lines of the POwerQuic CPU are directly connected to the front I/O connector

Operating System Support and Firmware
OK-1, VxWorks

Power Consumption
3.3V 0.5A (typ.), 5.5V 0.8A (typ.)

Environmental
Temperature (operating): 0ºC to +50ºC
Temperature (storage): -40ºC to +85ºC
Relative Humidity: 5% to 95%
(non-condensing)

Standard Compliance
PCI Rev. 2.2
P1386 and P1386.1/Draft 2.4