PMC Products


	PMC Telecommunication	NPMC-8E1/T1/J1
		The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.
	PMC Telecommunication	NPMC-DSP
		The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.
	PMC Telecommunication	NPMC-STM1
		The NPMC-STM1 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 155 MBit/sec and is conformant to the optical interface standard OC-3. OC-3/STM-1 interface for SONET/SDH monitoring and termination applications Add/Drop multiplexer for 63 E1 or 84 T1 channels APS (Automatic Protection Switching) E1/T1 channel extration to H.110 backplane PICMG 2.15 PTMC configuration 2 Channel extraction on DS0 basis
	PMC Telecommunication	NPMC-STM4
		The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12. OC-12/STM-4 interface for SONET/SDH monitoring and termination applications Add/Drop multiplexer for 252 E1 or 336 T1 channels E1/T1 channel extration to H.110 backplane PICMG 2.15 PTMC configuration 2 Channel extraction on DS0 basis
	PMC Telecommunication	NPMC-8280-4E1/T1/J1
		The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 PowerQuicc II processor. It supports four E1/T1/J1 ISDN primary rate interfaces, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel.
	PMC Telecommunication	NPMC-8266-OC3
		The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQuicc II" processor. It supports 4 E1/T1/J1 ports using standard RJ 45 connectors as well as an ATM interface using an OC-3 optical fibre port (SC duplex single or multi mode transceiver) at the front panel.
	PMC Telecommunication	NPMC-OC3
		The NPMC-OC3 is a telecommunication/networking interface board in PMC (PCI mezzanine card) form factor. The module provides a highly scalable telecom/networking solution for ATM applications with the requirement of cost-effective OC-3 access.
	PMC Telecommunication	NPMC-8260-4E1/T1/J1 - discontinued
		The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 PowerQuicc II processor. It supports 4 E1/T1 ISDN primary rate interfaces as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments. Note: This module will be replaced by the NPMC-8280-4E1/T1 in 2005, it is not recommended to use this module for new projects.
	PMC Telecommunication	NPMC-860-2E1/T1
		The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 PowerQUICC CPU, two E1 or T1 ISDN interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1/T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.
	PMC Telecommunication	NPMC-4E1/T1- discontinued - successor: NPMC-8E1/T1/J1
		The NPMC-4E1/T1 is a highly efficient low-cost PMC module with four E1 or T1 ISDN primary rate interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1/T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.
	PMC Telecommunication	NPMC-860-4S0
		The NPMC-860-4S0 is a powerfull telecommunications interface board in PMC form factor based on the MPC860 PowerQUICC processsor. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode. Access to the TDM backplane bus is achieved by the onboard SCBus controller.
	PMC Serial I/O	NPMC-860-SIO- discontinued
		The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASH Prom and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.
	PMC General Purpose	NPMC-860-CPU- discontinued
		The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.
	PMC General Purpose	NPMC-860-I/O- discontinued
		The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards. NOTE: Available transition module NTM-BASIC and corresponding I/O modules are shown in our IP products section.
	PMC Measurement / Test	NPMC-EXT64
		The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-8260-4E1/T1/J1 - discontinued

NPMC-4E1/T1- discontinued - successor: NPMC-8E1/T1/J1

NPMC-860-SIO- discontinued

NPMC-860-CPU- discontinued

NPMC-860-I/O- discontinued