NAMC-ZYNQ-FMC: FMC Carrier AMC with Xilinx ZYNQ-7000 FPGA
AMC for data acquisition & signal processing applications and computing nodes based on MicroTCA and AdvancedTCA
discontinued ! - replacement product: NAT-AMC-ZYNQUP-FMC
The NAMC-ZYNQ-FMC is an AdvancedMC (AMC) featuring a Xilinx ZYNQ®-7000 FPGA and an FPGA mezzanine card (FMC) slot. This single-width, mid-size AMC is designed for data acquisition and processing applications and computing nodes. The ZYNQ-7000 FPGA provides the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, enabling key analytics and hardware acceleration while integrating CPU, DSP, ASSP, and mixed signal functionality on a single device.
|
 | ![]() |
 |  |  |






- Xilinx ZYNQ-7000 XC7Z045 or XC7Z100 FPGA
- High pin-count FMC slot complies with VITA 57.1
- Dual banks of DDR3 memory (1 GB 64-bit, 512MB 32-bit)
- 256 MB NOR quad SPI flash memory
- MicroSD card slot
- AMC.1, AMC.2, AMC.3, AMC.4 and IPMI 2.0 compliant
- JTAG access over backplane
Single mid-size AMC (optional full-size front panel)
Width 73.5mm, depth 180.6mm
Processing Resources
- System on Chip (SoC) Xilinx Zynq 7000 XC7045 or XC7100 (FFG900 package (31x31mm) (444k LE, 26.5 Mbit internal SRAM, 16 SerDes, 400 I/0, 2k DSP Slices)
- 1 GB 64-bit DDR3 memory
- 512 MB 32-bit DDR3 memory
- 256 MB NOR QSPI Flash memory
- MicroSD Card Slot
Board Support Package
- Linux boot – Linux Drivers
- AXI4 Wrappers to all external/internal interfaces (soon)
- Design example (soon)
- Documentation
FMC Site
- Single high pin-count FPGA mezzanine card slot per VITA 57.1
- All differential pairs (LA/HA/HB) routed to the FPGA
- DP0 to DP5 routed to the FPGA
Front Panel
- Dual UART-USB to ARM core and MMC
- Other connection depend on FMC module used
Backplane connection
Full AMC TCLKA-D and FCLKA connectivity
- Dual 1GbE connect to Port 0 and Port 1
- One x8 PCI Express Gen2 connect to Fat-Pipe-Region Ports 4-11 or
- Dual x4 PCI Express Gen2 to Fat-Pipe-Region Ports 4-7 and Ports 8-11
or
- Dual x4 SRIO Gen2 to Fat-Pipe-Region Ports 4-7 and Ports 8-11
- Dual XAUI (10Gbe) to Fat-Pipe-Region Ports 4-7 and Ports 8-11 (soon)
- Any Combinations of PCIe, SRIO, XAUI (on request)
- Extended: Ports 12-15 routed to FPGA (2 x 4 LVDS)
Compliance
- AMC.0 R2.0, AMC.1, AMC.2, AMC.3, AMC.4, IMPI V1.5 & V2.0, HPM.1
- EN60950, UL1950, RoHS
FMCs supported as standard
- FMC4300
- FMC4301
- FMC4302
- FMC316
N.A.T. is continually developing new FMCs and will check compatibility with the NAMC-ZYNC-FMC. Compatibility of other N.A.T. and third-party FMCs can be verified upon request.
Title
|
Description
|
Format
|
Size
|
Rev #
|
Date Last Modified
|
namc_zynq_fmc_ds | Data Sheet | 784 kB | 1.2 | 31-05-2016 | |
namc_zynq_fmc_man_hw |
Hardware Manual | Â pdf | 1.9 MB | 1.2 | 09-06-2020 |
namc_zynq_fmc_man_fw | Firmware Manual | pfd | 498 kB | 1.1 | 15-02-2017 |
Â

Product Code Hardware: NAMC-ZYNQ-FMC - [Option FPGA] - [Option FP]
Option
|
Value
|
Description
|
Comment
|
FP | -0 -1 |
front panel of single width | 0 = mid-size 1 = full-size |
FPGA | -045 -100 |
type of Kintex-7 ZYNQ FPGA | 0 =Â Zynq-7000Â XC7Z045 1 =Â Zynq-7000Â XC7Z100 |
Product Code Firmware:Â NAMC-ZYNQ-FW - [Option]
Â
Option
|
Description
|
Comment
|
NBSP-LINUX-NAMC-ZYNQ-FMC |
N.A.T. Board Support Package Linux |
- |
NFW-NAMC-ZYNQ-FMC-AXI | N.A.T. Firmware Package AXI interface for Vivado software | - |